Operation; Diagrama Eléctrico; After Finishing The Work; Maintenance Operation - Skymsen LAR-25LMB Manual De Instrucciones

Ocultar thumbs Ver también para LAR-25LMB:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problemas
* La Máquina no se
*
Falta de Energia
eléctrica, o enchupe
prende.
desconectado de la red
eléctrica.
* Problema en el circuito
e l é c t r i c o i n t e r n o o
externo de la máquina.
* Problema en el sistema
* Vaso presenta
de vedamiento.
filtracion.
5.2 Diagrama Eléctrico

6. CONSEJOS GENERALES

- Do not wear loose fitting clothes while operating the unit. Do not use bracelets or any other piece of jewelry. Have
your hair always shortened and held up (use hair fishnets if necessary) in a way it cannot reach any part of the
machine. Roll up any loose sleeves.
- SKYMSEN is not responsible for any harm or injury caused by the negligent or inappropriate use of this
equipment by any operator. This equipment must be operated only by persons whose age equals or exceeds 18
years old, in a safe and sound state of mind, free from the influence of any kind of drugs and alcohol, that received
proper training and instructions regarding the correct operation of this machine, that are wearing correct and
authorized safety clothes. All and any kind of modifications carried on and applied to this machine immediately
nullifies any kind of warranty and may result in harm and injuries to the individuals operating this machine and to
individuals that are located in the machine surrounding areas while it is being operated.
- Under no circunstances place your hands in the moving parts of the machine while it is being used. Make sure the
machine has come to a complete stop before acessing the processed ingredients.
19
Tabla - 02
Causas
Soluções
*
Verifique si el
e n c h u f e
conectado la toma de
corriente y si hay
energía eléctrica en la
red eléctrica.
*
Llame el servicio
técnico.
*
Llame el servicio
técnico.

4.4 Operation

e s t á
4.4.1 Advice
Be sure your hair is not loose in order to avoid getting caught by
turning parts which could lead to a serious accident. Tie your hair well up
and/or cover your head with a scarf.
The operation performed by not trained or skilled personnel shall be
forbidden.
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under
perfect conditions.

4.5 After Finishing The Work

4.5.1 Precautions
Always TURN THE MACHINE OFF by removing the plug from the
socket before cleaning the machine.
Never clean the machine unless it has come to a COMPLETE
STOP.
Put all components back to their functional positions before
turning it ON again.
pulleys nor chains and gears.
4.6
Maintenance
4.6.1 Danger
Any maintenance with the machine in working situation is
dangerous. TURN IT OFF BY PULLING THE PLUG OFF THE SOCKET
DURING MAINTENANCE.
Always unplug the machine when emergency cases arise.
4.7 Advice
Electrical or mechanical maintenance must be done by qualified
personal for such operation.
Person in charge has to be sure that the machine is under TOTAL
SAFETY conditions when working.
DO NOT place your fingers in between belts and
IMPORTANT
08

Publicidad

Tabla de contenido
loading

Tabla de contenido