Display; Volume; Route Selection - Audiovox NAV3000 Instrucciones De Manejo Y De Montaje

Display

For overhead mounting of the display it is possible to rotate the display contents 180
degrees.
Select the "Display" option from the "System settings" menu.
Select the desired setting according to the mounting position of the display.

Volume

Select the "Volume" option from the "System settings" menu.
:
A volume slider with the current volume setting is shown.
Adjusting the volume:
Place the cursor on the volume slider.
Confirm by pushing the OK key.
:
The volume adjustment is activated now.
Adjust the desired volume level with the cursor keys 4 or 6.
:
The selected volume setting is announced.
Push OK to store the setting.
Voice messages on/off:
Move the cursor on the "Mode:" option.
Push OK.
Select Mode "On" or "Off".
D
–
On: Voice on
F
–
Off: Voice off
Push OK to store this selection.
The icon for voice on/off is shown in information screen i5 (Current settings).

Route selection

Select the "Route selection" option from the system settings menu.
:
The cursor is placed on the criterion currently selected.
Select the desired criterion:
Along main roads N (Prefers highways for route planning)
–
No main roads M (Avoids highways for route planning)
–
Optimize time C (Prefers the fastest route)
–
Optimize distance V (Prefers the shortest route)
–
The icon for the selected criterion is shown in the information screen i5 (Current
settings).
Furthermore you have the opportunity to minimize the use of toll routes. If you do not
want the navigation system to use toll routes for route planning:
Activate the "No toll routes" option in the route selection list.
:
A tick appears before the option.
If no toll-free roads are available for route planning, toll roads are used.
Note: If this option is activated, route planning may take longer. Therefore it is
recommended to use this function only if it is necessary.
SYSTEM SETTINGS
35