Audiovox NAV3000 Instrucciones De Manejo Y De Montaje página 46

MOUNTING INSTRUCTIONS
Insert metal sleeve into the DIN opening and press appropriate tags outwards with a
screwdriver. Take care not to damage hidden parts in the dashboard.
Mounting the navigation computer with brackets
If the navigation computer should or can not be installed in a DIN opening, it can be
mounted with the supplied mounting brackets in other places, for example in the
glove compartment, in the luggage boot or under the seats.
Therefor the two springs at either side of the navigation computer first have to be
unscrewed. The two TORX screws are required for later fastening of the two mounting
brackets.
Mounting the brackets, ill. 5
1. Put the bracket with the punched-out strap to the left or right rear edge of the
housing of the navigation computer. Take care that the strap completely moves into
gear with the metal body of the housing.
2. Turn bracket to the front while applying pressure to the rear edge of the bracket to
ensure a tight fitting of the bracket to the housing of the computer.
3. Fix the brackets to the housing with the two TORX screws.
Now the navigation computer can be mounted to the desired mounting position with
the supplied screws.
Suspended mounting
If the navigation computer has to be mounted in suspended position (for example
under the hat shelf), the mounting brackets can be fixed the other way round.
Installing GPS antenna, ill. 6 - 7
The GPS antenna can be mounted in the vehicle interior, for example on the
dashboard or on the rear deck. The antenna must have clear "view" of the sky.
–
In vehicles with metallic window tinting the GPS antenna should be mounted
outside on the vehicle body, for example on the roof or in the plastic bumper.
–
On metal surfaces the antenna can be fixed magnetically. Therefor remove the
metal plate from the bottom of the antenna and place the antenna on the cleaned
surface.
–
When mounting on other surfaces the metal plate has to remain below the
antenna. In this case stick install antenna with double-sided adhesive tape.
Note: To ensure perfect function please keep a distance of at least 4 inches from
metall parts like window frame.
46