Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. Screen Configuration
Function Selection of remote controller
A
Standard Control Screens
OFF
B
Timer Monitor
MON
TIMER
OFF
˚F
WEEKLY
4. Setting the Day of the Week and Time
TIME SUN
˚F
TEMP.
2
MENU
ON/OFF
BACK
MONITOR/SET
DAY
PAR-21MAA
CLOCK
A
Note:
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
5. Operation
2
3
˚F
3
TEMP.
2
MENU
ON/OFF
BACK
MONITOR/SET
DAY
PAR-21MAA
CLOCK
Set Day/Time
TIME SUN
D
C
˚F
˚F
ON
C
Timer Setup
SUN MON TUE WED THU FRI SAT
B
1
Day of the Week &
Time display
˚F
9
ON/OFF
FILTER
4
CHECK
TEST
OPERATION
CLEAR
6
4
5
8
˚F
7
ON/OFF
1
FILTER
CHECK
TEST
1
OPERATION
CLEAR
5
7
8
6
<Screen Types>
For details on setting the language and temperature display for the remote
controller display, refer to section 8. Function Selection.
The initial language setting is English.
The initial temperature display setting is °C. Please change the setting to
°F in section 8. Function Selection.
G Function Selection of remote controller:
G Set Day/Time:
G Standard Control Screens:
G Timer Monitor:
G Timer Setup:
<How to change the screen>
WEEKLY
A :Hold down both the Mode button and the Timer On/Off button for 2
seconds.
B :Press the Timer Menu button.
C :Press the Mode (Return) button.
D :Press either of the Set Time buttons (
2
1. Press the
or
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 : Sun → Mon → ... → Fri →
Sat.
3. Press the appropriate Set Time button A as necessary to set the time.
* As you hold the button down, the time (at 4) will increment first in
minute intervals, then in ten-minute intervals, and then in one-hour in-
tervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button 4 to lock in the values.
5.1. Turning ON/OFF
<To Start Operation>
I Press the ON/OFF button 1.
• The ON lamp 1 and the display area come on.
Note:
G When the unit is restarted, initial settings are as follows.
Mode
Temperature setting
Fan speed
Airflow up/down
Set the functions and ranges available to the re-
mote controller (timer functions, operating restric-
tions, etc.)
Set the current day of the week or time.
View and set the air conditioning system's oper-
ating status
View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
or
).
3
Day of the Week Setting
TIME SUN
4
Time Setting
Set Time button A to show display 2.
Remote Controller settings
Last operation mode
Last set temperature
Last set fan speed
Horiz. outlet
COOL or DRY
Last setting
Mode HEAT
Horiz. outlet
FAN
5
Publicidad
Capítulos
Tabla de contenido
