Foscam FI8918W Guía De Instalación Rápida página 22

Click Live Video. You can see living video.
4. Wireless Connection Settings
Step 01) Please choose "For Administrator" and click "Wireless LAN Settings". Then enable
"Using Wireless LAN".
Click the Scan button and the camera will detect all WIFI devices around the area. It should also
display your router in the list. (Figure 1.8)
If the camera is not able to detect any WIFI device, please click the Scan button again. Make sure
to wait 1 to 2 minutes before selecting the Scan button again.
Step 02) Click the SSID of your router in the list, the corresponding information (SSID & Encryption)
will be filled in the following boxes automatically.
You will only need to fill in the share key. Make sure that SSID, Encryption and share key you filled
in for the camera are exactly the same for your router
www.foscam.com
Figure 1.6
Figure 1.7
Figure 1.8 Wireless LAN Settings
FI8918W Quick Installation Guide
.
- 21 -