How To Connect - Audio-Technica ATH-MSR7NC Manual De Usuario

How to connect

Connector Connector
plug plug
Detachable 1.2 m (3.9') headphones
cable for smartphones with in-line
controller/microphone unit
Detachable 1.2 m (3.9') headphones cable
1 Select the cable that you want to use, and connect the connector plug of the cable to the input jack of
the headphones.
* Before using the detachable cables, identify the "Connector plug" and the "Input plug" .
2 Minimize the volume of each sound device, then connect the "Input plug" to the headphones terminal.
* Use included airplane adapter to connect to typical airline audio systems.
3 Move the power/ANC switch on the product to the ON
position, and fit the earpads over your ears with the side
marked "L " over your left ear and "R" over your right ear,
adjusting the headband length by sliding the adjustable
slider as shown in the figure.
* Place the product on your head with the opening part
facing upward, so that the product can provide stable
noise-cancelling performance.
* Make sure the indicator is on.
The indicator lights in
Blue
Red
Purple
4 Turn on your audio device, and adjust volume as necessary.
* Also read instruction manual of audio device.
Portable audio
Smartphone
player etc.
Input plug
Condition
The power/ANC switch is on
Charging
The power/ANC switch is on and charging
Using headphones
3.5 mm (1/8")
stereo dual jack
Airplane
adapter
3.5 mm (1/8")
stereo mini jack
Input plug
Slider
Slider
English
AIrline
seat
Opening part
7