Charging - Silvercrest HG00595D Instrucciones De Utilización Y De Seguridad

Altavoz bluetooth para exteriores
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 111

Charging

The battery must be charged prior to first use.
When the battery is drained, a sound will be
emitted every 30 seconds during operation.
The battery should then be charged as soon as
possible.
Depending on the volume and the age of the
battery, the operating time for the device is
approx. 5 hours when fully charged.
Open the protective cover
.
3
Insert the micro-USB plug of the charging cable
12
into the micro-USB socket
of the Bluetooth
®
8
speaker. Insert the USB plug of the charging
cable into the USB port on a PC or a USB adapter
(not included in scope of delivery).
Note: The signal LED
will light up red whilst
2
charging and goes out once charging is completed.
The charging time for a drained battery is approx.
4 hours.
Note: The speaker may be used whilst charging.
However, doing so will at a minimum double the
charging time.
Once charging is complete, remove the micro-USB
plug of the charging cable and close the protective
cover so the device is splash-proof again.
38 GB/IE

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hg00595eHg00595f

Tabla de contenido