NEC MULTEOS M40 Manual Del Usuario página 40

Notes
NOTE 1: CREATING A SCHEDULE
The schedule function allows the display to be set to power
on and off at different times. Up to seven different schedules
can be programmed.
To program the schedule:
1. Enter the SCHEDULE menu.
Highlight SCHEDULE SETTING using the up and down
buttons. Press the SET or the + button to enter the Settings
menu. Highlight the desired schedule number and press
set. The box next to the number will turn yellow. The
schedule can now be programmed.
2. Use the up and down arrows to highlight INPUT.
Use the + and - buttons to choose the input source.
3. After the INPUT source is selected, use the down button
to highlight the hours setting in the ON timeslot. Use the +
and - buttons to set the hour. Use the up and down buttons
to highlight the minutes setting. Use the + and - buttons to
set the minutes. Set the OFF time in the same manner.
4. Use the down button to select a day on which the schedule
will be enabled. Push the set button to enable. If the
schedule is to be ran every day, use the choose EVERY
DAY and press the SET button The circle next to EVERY
DAY will turn yellow. If a weekly schedule is desired,
choose the days of the week using the up and down
buttons and pressing SET to select. Then highlight the
EVERY WEEK option and press SET.
DVI
SCHEDULE:
OFF TIMER
SCHEDULE SETTING
SCHEDULE LIST
DATE & TIME
SCHEDULE RESET RESET
Choose
5. After a schedule is programmed the remaining schedules
can then be set. Press CLOSE to leave the OSM or press
EXIT to go back to the previous menu.
NOTE:
If schedules are overlapping then the schedule with
the highest number will have priority over the schedule
with the lowest number. For example Schedule #7 will have
priority over Schedule #1.
NOTE 2: IMAGE PERSISTENCE
Please be aware that LCD Technology may experience a
phenomenon known as Image Persistence. Image Persistence
occurs when a residual or "ghost" image of a previous image
remains visible on the screen. Unlike CRT monitors, LCD
monitors' image persistence is not usually permanent, but
constant images being displayed for a long period of time
should be avoided since there may be a "semi-permanent"
effect.
To alleviate image persistence, turn off the monitor for as
long as the previous image was displayed. For example, if an
image was on the monitor for one hour and a residual image
remains, the monitor should be turned off for one hour to
erase the image.
As with all personal display devices, NEC DISPLAY SOLU-
TIONS recommends displaying moving images and using a
moving screen saver at regular intervals whenever the screen
is idle or turning off the monitor when not in use.
Please set the "SCREEN SAVER", "DATE & TIME" and
"SCHEDULE SETTINGS" functions to further reduce the
risk of Image persistence.
TODAY: SEP.27.2006 12:18
SETTINGS:
1 2 3 4
INPUT: DVI
ON: 10 : 30
OFF: 17 : 45
• EVERY DAY
MON TUE
FRI SAT
EVERY WEEK
Mark Return
English-34
5 6 7
WED THU
SUN