Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning Your Appliance
•
Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
•
Unplug the appliance, remove the content.
•
Wash the inside with a damp warm cloth containing a water and baking soda solution. The
solution should be about 2 tablespoons of baking soda to a quart of water.
•
Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
•
The outside of the appliance should be cleaned with mild detergent and warm water.
•
Dry the interior and exterior with a soft cloth.
Moving Your Appliance
•
Remove all the content.
•
Securely tape down all loose items inside your appliance.
•
Remove the rollers to prevent damage
•
Tape the door shut.
•
Be sure the appliance stays in the upright position during transportation.
Energy Saving Tips
•
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
•
Overloading the appliance forces the compressor to run longer.
•
Appliance shelves should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
CARE AND MAINTENANCE
11
Publicidad
Tabla de contenido
