Function Instruction; Operating Modes; Timer Function - Danby DVAC080F1WDB Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

FUNCTION INSTRUCTION

Operating Modes

Press the Mode Button repeatedly to choose the
desired mode. The adjacent indicator light will
illuminate to show which mode has been selected.
• Auto mode
Auto mode is a pre-set factory program that
automatically defi nes the mode (cool or dry)
and fan speed based on the set temperature, the
ambient temperature and the ambient humidity.
• Sleep mode
When in sleep mode, the fan will run on low speed
to keep the noise to a minimum. The temperature
setting will gradually increase by 2° above the
original set temperature over the course of 2 hours
to conserve energy.
• Energy saver mode
When is energy saver mode, the fan will cycle on
and off when the compressor turns on and off to
limit the energy consumption.
• Cool mode
Choose cool mode to set the cooling function. Use
the up and down arrows to choose the desired
temperature. When cool mode is selected, the fan
speed can be adjusted by pressing the fan button.
• Dry mode
Choose dry mode to remove excess moisture
from the air during periods of high humidity. All
water pulled from the air will condense inside the
appliance and drain out the back. The fan speed
will be automatically set and cannot be modifi ed in
dry mode.
• Fan mode
Choose fan mode to run the internal fan without
engaging the cooling function. Press the fan button
repeatedly to choose the fan speed, low, medium or
high.

Timer Function

The Timer Function can be used to turn the
appliance on or off after a set period of time.
Auto On Function
1. Press the timer button when the appliance is
turned off to set the auto on timer.
2. Use the up and down arrows to select the
desired amount of time before the appliance
should turn on.
3. The time selected will appear on the display
panel and will count down until the appliance
turns on.
Auto Off Function
1. Press the timer button when the appliance is
turned on to set the auto off timer.
2. Use the up and down arrows to select the
desired amount of time before the appliance
should turn off.
3. The time selected will appear on the display
panel and will count down until the appliance
turns off.
Using Auto On and Auto Off Simultaneously
If there is a need for the appliance to turn on, run
for a set period of time and then turn off, the auto
on and auto off functions can be used at the same
time by fi rst setting one and then the other. Both
indicator lights will illuminate and the display will
count down to the appliance either turning off or
on, whichever function was set fi rst.
Note: The timer will not cycle the appliance on and
off indefi nitely. The auto on and auto off timers will
function one time and then the appliance will return
to regular functioning.
Turning the appliance off or unplugging the
appliance will clear all memory settings, including
the timer.
12

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido