Location Of Controls; Operation; Setting The Sealing Time - Buffalo CC770 Manual De Instrucciones

UK

Location of Controls

Lid
Indicator
lights
'MINUS'
button
Upper
gasket
Sealing
bar
Channel

Operation

Note: THIS APPLIANCE IS DESIGNED TO BE USED WITH THE BAGS SUPPLIED. OTHER
BAGS MAY NOT SEAL CORRECTLY. CONTACT YOUR VACUUM PACK MACHINE SUPPLIER
FOR SUITABLE REPLACEMENT BAGS.

Setting the Sealing Time

This appliance has three programmable sealing settings; M1-M3.
Connect the appliance to the mains power supply and turn the power switch On [I].
1.
Raise the lid. This activates the appliance ready for use.
2.
The value shown in the 'TIMER' display window is the default sealing time, shown in seconds.
3.
Note: The default value (2 seconds) is suitable for the bags supplied by the appliance.
Press and hold the WELDING button. The M1 indicator flashes on the panel.
4.
To adjust the sealing time, press and hold the
5.
the display.
Note: A period after the value (e.g. '4.') indicates an increment of half a second for more
accurate timing.
Repeat steps 4 and 5 for M2 and M3.
6.
Press and hold the WELDING button. All three indicators flash.
7.
Press and hold the WELDING button again to store the sealing time presets.
8.
2
'PLUS' button Display
'STOP'
Suction ON/OFF
nozzle button switch
or button until the required time is shown on
Model shown: CC770
'WELDING'
button
Fuse