Establishing A Bluetooth Connection; Ending A Bluetooth Connection - Yamaha EPH-W53 Manual De Instrucciones

Establishing a Bluetooth connection

Press and hold the function key until the indicator lights in blue (for about five sec-
onds).
The earphones turn on and a Bluetooth connection is established with the most-recently con-
nected Bluetooth device.
Note
• If you continue to press and hold the function key, the earphones are waiting for pairing. If a
pairing operation is not needed, immediately stop pressing after the indicator lights in blue.
• Some Bluetooth devices may not connect automatically.
• If the Bluetooth device does not connect to the earphones automatically, operate the device to
connect to the earphones.
• After you turn off the Bluetooth setting of the Bluetooth device, a Bluetooth connection is not
automatically established with that device when you turn on the power of the earphones.
• The earphones can establish a Bluetooth connection with two devices simultaneously (multi-
point connection). To establish a Bluetooth connection with the second device, perform the
process also on that Bluetooth device. Audio from the connected Bluetooth devices can be
switched by playing or stopping music from the connected Bluetooth devices.

Ending a Bluetooth connection

If a Bluetooth connection exists, you can end it in either of the following ways.
- Turn off the power of the earphones.
- End the Bluetooth connection on the Bluetooth device.
EN 9