Rinse+Spin; Extra Options And Functions - LG WT22WT6H Manual Del Propietário

Tub Clean
This is a special function to clean inside the drum
of your appliance.
• To use this function, refer to the
MAINTENANCE for details.
Extra Options and
Functions
Cold Wash
This option saves energy by using cold water while
increasing the wash and rinse times to maintain
wash performance.
• Wash time will increase up to 50% with this
option.
• For best wash results, only wash small loads
(less than 3.62 kg) with this option.
Signal
This appliance plays a melody when the wash
cycle has finished. The volume of the melody is
adjusted using this button.
• Press this function repeatedly to adjust the
volume of the signal.
• When no signal is heard, the signal is off.
• The volume settings are Off or On. The signal
volume can be adjusted at any time as long as
this appliance is turned on.
Delay Wash
Once you have selected the programme and other
settings, press this button to delay the start of the
wash cycle.
• Each press of the button increases the delay
time by 1 hour, for up to 19 hours.
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
• If the Start/Pause button is not pressed
to begin the delay time, the appliance will
automatically shut off after 60 minutes and all
cycle settings will be lost.

Rinse+Spin

Select this option to rinse and spin a load
separately from a regular programme.
• This can be helpful in preventing fresh stains
from setting in fabrics.
• To use this option, do not select a programme.
1
Press the Power button to turn on the
appliance.
2
Press and hold the Delay Wash button for 3
seconds.
3
Press the Spin button to change the spin
speed.
4
Press the Start/Pause button.
Water Plus
Use this option to add extra water to the wash
cycle for better wash performance (stain
treatment) with large or bulky items.
• If this appliance reaches its maximum water
level, this option will have no effect.
• When Normal programme is selected, if you
select this option, programme will be changed
to the Deep Wash programme before starting.
Soak
This option provides 30 minutes presoak prior to
the start of the selected cycle.
• Press and hold the Water Plus button for 3
seconds.
• Use this option to presoak garments to help
remove difficult spots or stains on fabrics.
• At the end of the presoak time, the selected
cycle will begin with the same water used for
the soak.
EN
23