Replacing The Record Stylus; Moving This Unit - Yamaha MusicCast VINYL 500 Manual De Instrucciones

Ocultar thumbs Ver también para MusicCast VINYL 500:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacing the record stylus

When the tip of the record stylus becomes worn down or damaged, replace it
immediately.
As the replacement stylus, please purchase an ATN3600L replacement stylus
made by Audio-Technica.
CAUTION
Attach the stylus cover before replacing the stylus. The tip of the stylus
might injure you, or it might become damaged.
Take care that children do not swallow the stylus when it is removed.
1
Turn off the power of this unit and of the connected devices, and
disconnect this unit's AC adaptor from the AC outlet.
2
While using your fingers to hold the body of the cartridge, press
the stylus down in the direction of
2
to remove it.
1
2
1
, and pull it in the direction of
3
While using your fingers to hold the body of the cartridge, insert
the tab of the replacement stylus into the groove on the underside
of the cartridge.
4
Press the stylus upward until you hear a click.

Moving this unit

When moving this unit, lock the tone arm so that it does not move.
|
When necessary
Moving this unit
Underside
Groove
En
37

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Tt-n503

Tabla de contenido