Milwaukee 5317-DE Manual Del Operador página 3

ASSEMBLY
Connecting the Vacuum Hose
Attach the vacuum hose to the port. Twist to form
a tight fit.
Installing/Removing Brush Rings
Replace the brush rings when the brushes show
signs of wear.
To remove the brush rings, push the outer ring out of
the attachment. To install, press the brush rings into
the attachment until it is firmly in place.
OPERATION
To reduce the risk of fire and in-
WARNING
jury, do not use to pick up flam-
mable or combustible materials. Empty dust box
completely before use.
To reduce the risk of injury, wear safety goggles
or glasses with side shields.
To reduce the risk of injury, wear a dust mask or
use an OSHA compliant dust extraction solution.
1. Line up the SDS Max Dust Extraction Attachment
at the targeted location.
NOTE: The drill bit may be used to aid alignment by
pushing it through the brush rings. Once the location
is set, remove the bit from the attachment.
2. Attach the vacuum hose to the dust port using the
49-90-1959 adaptor.
3. Turn on the dust extractor. Make sure the auto-
clean mode is off.
4. Push the bit through the brush rings.
NOTE: Make sure the drill is in hammer-drill mode.
5. Hold the tool with both hands and start drilling.
6. After drilling is complete, turn the dust extractor
auto-clean mode on.
7. Run the dust extractor until there is a cleaning
pulse to finish the automatic cleaning cycle.
MAINTENANCE
To reduce the risk of injury, always
WARNING
unplug the tool before performing
any maintenance. Never disassemble the tool.
Contact a MILWAUKEE service facility for ALL
repairs.
Maintaining Tools
Keep your tool in good repair by adopting a regular
maintenance program. Inspect your tool for issues
such as undue noise, misalignment or binding of
moving parts, breakage of parts, or any other condi-
tion that may affect the tool operation. Return the tool
to a MILWAUKEE service facility for repair. After six
months to one year, depending on use, return the
tool to a MILWAUKEE service facility for inspection.
To reduce the risk of personal in-
WARNING
jury, electric shock and damage,
never immerse your tool in liquid or allow a liquid
to flow inside it.
Clean dust and debris from vents. Keep handles
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use flammable or
combustible solvents around tools.
For repairs, return the tool to the nearest service
center.
ACCESSORIES
Use only recommended accesso-
WARNING
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST
Monday-Friday, 7:00 AM - 6:30 PM CST
www.milwaukeetool.com
or visit
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
B e c o m e a H e a v y D u t y C l u b M e m b e r a t
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
3
Cleaning
Repairs
(1.800.729.3878)