Precautions; Specifications - Sony BRU-H700 Manual De Instrucciones

Precautions

Operating or storage location
Operating or storing the unit in the following locations
may cause damage to the unit:
• Extremely hot or cold places (Operating temperature:
° ° °
0 C to 40 C [32 F to 104
• Exposed in direct sunlight for a long time, or close to
heating equipment (e.g., near heaters)
• Close to sources of strong magnetism
• Close to sources of powerful electromagnetic
radiation, such as radios or TV transmitters
• Locations subject to strong vibration or shock
Ventilation
To prevent heat buildup, do not block air circulation
around the unit.
Transportation
When transporting the unit, repack it as originally
packed at the factory or in materials equal in quality.
Cleaning
• Use a soft, dry cloth to clean the external surfaces of
the unit. Stubborn stains can be removed using a soft
cloth dampened with a small quantity of detergent
solution, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene
or thinners as they may damage the surface finishes.
°
F])

Specifications

System
Video signal 1080/59.94i, 1080/50i (switched
with the VISCA FUNCTION
switches)
Synchronization Internal/external synchronization
automatically switched
Aspect ratio 16:9 (wide mode)
Video S/N 50 dB
Input/output connectors
Camera input LC Duplex Fiber connector (1)
Video output D-sub 15-pin
RGB: 0.7 Vp-p (no sync, at 75-
ohm termination)
1 Vp-p (±0.3 V, tri-level sync,
at 75-ohm termination)
Component :
Y: 1 Vp-p (±0.3 V, tri-level
sync,
at 75-ohm termination)
Pb/Pr: ±350 mVp-p, 75-ohm
terminated
HD/VD Sync: 1 Vp-p, 75-ohm
terminated
Tri-level Sync: ±300 mVp-p,
75-ohm terminated
External sync input/output
EXT SYNC IN: BNC type (1)
Tri–level signal ±300 mVp-p
SD sync 2.0 V max. (with
automatic termination)
EXT SYNC OUT: BNC type (1)
Control input/output VISCA RS-232C IN: Mini DIN
8-pin type (1)
VISCA RS-232C OUT: Mini
DIN 8-pin type (1)
VISCA RS-422: 9-pin type (1)
Control signal format
9600 bps/38400 bps
Data: 8 bit
Stop bit: 1
Audio line output Phono jack, right (1)/left (1)
Maximum output level: 2.8
Vrms
Output impedance 1 kilohms or
less (Reference impedance 1
kHz)
General
Power requirements 100 to 240 V AC, 50/60 Hz
Current consumption 0.4 to 0.3 A
7
Precautions / Specifications
GB