3) SAFETY INFORMATION
WARNING
To avoid electrical shock, do not use this instrument when working
voltages at the measurement surface is over 24V AC or DC.
WARNING
To avoid damage or burns, do not make temperature measurement
in microwave ovens.
WARNING
Do not attempt to operate this instrument in an explosive atmosphere
(i.e. in the presence of flammable gases or fumes, vapor or dust).
WARNING
Calibration and repair of any instrument should only be performed by
qualified and trained service technicians.
CAUTION
Repeated sharp flexing can break the thermocouple leads. To prolong
lead life, avoid sharp bends in the leads, especially near the connector.
CAUTION
Do not keep or operate the instrument in place with high temperature
or high humidity.
17