Saving Measurements; Reading Saved Measurements; Erasing Saved Measurements; Connecting The Wireless Communication (Mth-1362W) - Minipa MTH-1362 Manual De Instrucciones

I. Saving Measurements
Press the SAVE button to save the temperature and humidity mea-
surements. The temperature and humidity measurements disappear
of the display and a number is displayed indicating the position that
the measurement was saved. It can store in memory up to 256 data
J. Reading Saved Measurements
Press the READ button to read the saved measurements. The
saved measurements are displayed. Press and to change the
displayed measurement.
K. Erasing Saved Measurements
Press the button for more than five seconds to erase all the saved
measurements, the indicator CLr is displayed.
L. Connecting the Wireless Communication (MTH-1362W)
Press the button for more than two seconds to power on the wireless
communication. The indication will be displayed.
For more information consult the software manual.
Note: The wireless receiver must keep a distance at least 40cm
from the meter and meter to meter distance must be at least 30cm.
23