Steren BAF-1545 Manual De Instrucciones página 28

INSTRUCTIONS
Make all initial connections with the power switches OFF on all devices. Make sure
volume levels are all the way down, you can adjust them later.
1. Connect the power cable to the electric outlet and connect
the other end of the power cable to the speaker.
3. Use the RCA line in input jacks in order to connect a CD,
MP3, DVD, mixer or other type of audio device.
To avoid damages and obtain a good sound quality
you should adjust the volume of your amplifi ed audio
source (ipod, MP3, DVD, etc.) between 50% to 70% level.
10 10
2. Connect a microphone to the input jack labeled MIC IN through
the 6.3 mm plug or Cannon plug.
4. Power all the devices on. A green LED indicator light will
illuminate indicating that the speaker is powered on.
ON