mesabiotech Accula DOCK Manual Del Operador página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
3.
Allow the assay to run to completion before moving or disturbing the Accula™ Dock. The internal fan
will turn on periodically during the assay. This is normal and expected. When the assay is finished, the
remaining time will be 00:00, and the Accula™ Dock will display:
4.
The Dock will beep every two seconds until the Test Cassette is removed.
5.
Remove the Test Cassette by pressing the latch button and pulling the lid open. Firmly grasp the top
of the Test Cassette and pull straight up until the Test Cassette is removed from the Dock. The results
of the assay may be immediately read. For instructions interpreting results, please refer to the test kit
instructions.
Once the Test Cassette has been removed, the Dock will display the number of tests that have been
run and the number remaining. For example:
6.
If fewer than 100 tests remain, the Accula™ Dock will beep three times, and the display will remind
the user to replace the unit. For example:"
7.
After a few seconds, the Dock will display:
8.
This indicates that the Accula™ Dock is ready to run another assay.
Reading the Test Results
Please refer to instructions provided with each assay test kit.
Re-programming the Dock
Periodically new tests are developed which require new programming for the Accula™ Dock. In order to
support these new tests, the Dock firmware must be updated. This is a very simple process, by following
these easy steps:
1.
Apply power to the Accula™ Dock as indicated in Section B – Installation. The Dock will automatically
initialize and display:
2.
Insert the latest Programming Cassette (denoted by red top) into the Dock as instructed in Section C
above (Inserting the test cassette). The Dock will sense the Programming Cassette and display:
Accula™ Dock Operator's Guide
60007 Rev H
TEST COMPLETE
READ RESULTS
RUN COUNT: 113
REMAINING: 887
REPLACE DOCK
IN 56 TESTS
DOCK READY
INSERT CASSETTE
DOCK READY
INSERT CASSETTE
PROGRAMMING
CASSETTE READY
8

Publicidad

Tabla de contenido
loading

Tabla de contenido