User Notifications; Alert Type (Display, Voice Or Tone); Reviewing Recent Alerts; Alert Test - Midland WR120 Manual De Instrucciones

WR-120 Owner's Manual

User Notifications:

Alert Type (Display, Voice or Tone):

1. Press MENU to open menu options.
▲
to scroll through menu to ALERT TYPE, then press SELECT .
2. Press
▲
to choose VOICE, TONE or DISPLAY then press SELECT .
3. Press
4. Press MENU to exit menu mode.
Alert Type
Display
Voice
Tone

Reviewing Recent Alerts:

The WR-120 All Hazards Weather Alert Radio can store up to 10 different
Weather/Hazard alerts (with overlapping effective times) in its memory. If
the weather radio receives a new alert while any previous alert is still in
effect, it automatically displays the new alert. You can review all alerts still
in effect by pressing
memory. A double beep indicates the end of the list. "NO MESSAGE" will be
displayed if no alerts are active.

Alert Test:

1. Press MENU to open menu options.
▲
to scroll through menu to ALERT TEST.
2. Press
3. Press SELECT to sound the alert siren.
4. Press any button to silence the siren or press MENU to exit menu mode.
Note: Ensure ON/OFF switch is in the ON position

Set Channel/Volume:

1. Press MENU to open menu options.
▲
to scroll through menu to SET CHANNEL then press SELECT .
2. Press
3. Tune the channel to the desired broadcast by using
4. Adjust the volume to a comfortable level by using VOLUME UP or
VOLUME DOWN .
5. Press MENU to exit menu mode.
Note: Ensure ON/OFF switch is in the ON position
page 8
Description
When the DISPLAY alert type is chosen, only a
text alert will scroll on the display. There will be
no audible alarm.
When the VOICE alert type is chosen, the alert
tone will sound for 8 seconds, then you will
hear the voice of the weather broadcast for 3
minutes.
When the TONE alert type is chosen, the alert
tone will sound for 3 minutes, or until you press
any but ton.
▲
to scroll through the weather radio's active alert
▲
▼
or .
www.midlandradio.com