Operation; Blending - Cuisinart Smart Stick CSB-179 Manual De Instrucciones

OPERATION

1. Press and hold the
LOCK/UNLOCK
.
button
No need to keep holding down the LOCK/UNLOCK button once
the blender is operating.

BLENDING

The specially designed blade blends, mixes and purées all kinds of
foods, including salad dressings, thick smoothies, powdered drink
products, soups and sauces. It can also be used to emulsify
mayonnaise.
This blade is designed to add minimal air to your mixture.
A gentle up-and-down motion lets you achieve the most flavorful,
full-bodied results. Be careful never to remove the blending shaft
from the liquid while in operation.
1. Connect the blending shaft to the motor body housing.
2. Plug electrical cord into a wall socket.
3. Immerse the blade end of blending shaft into mixture to be
blended. You can blend in the mixing cup, bowl, pot, saucepan
or pitcher.
4. Turn the variable speed slide to the speed recommended in your
recipe. NOTE: You can change the blending speed while
blending.
5. To turn the blender on:
See Operation, illustrations 1, 2, 3 above.
1. Press and hold the LOCK/UNLOCK button.
2. Then press and hold the ON/OFF button.
3. Release the LOCK/UNLOCK button while continuing to
hold down the ON/OFF button.
NOTE: Do not continuously blend for longer than 60 seconds.
Release ON/OFF button for 20–30 seconds between 60-second
blending cycles.
6. Unplug immediately after use.
2. Then press and
hold the ON/OFF
button.
11
3. Release the LOCK/
UNLOCK button while
continuing to hold down
the ON/OFF button.