Pre-Operating Instructions - Easy Home 49136 Manual Del Usuario

PRE-OPERATING INSTRUCTIONS

1. Be sure the humidifier is OFF and disconnected from the
electrical outlet.
2. Place the humidifier on a flat surface, about 24 in. (60cm) away from the
floor and 4 in. (10cm) away from the wall. We recommend to not place
the humidifier on important furniture.
3. Filling the water tank instructions:
- Remove the water tank. (See Fig 1)
- Twist off the tank cap located on the bottom of the tank by turning
counter clockwise
and fill the water tank with cool, fresh water. DO NOT FILL WITH
WARM WATER AS
THIS MAY CAUSE LEAKING.
- After filling the tank, replace the tank cap by firmly turning clockwise
and then replace the water tank on the base. The tank will immediately
begin to empty into the base.
4. Connect the power adapter to the unit and plug into a rated
electrical outlet.
Pre-operating instructions
9