Probe; Cooktop - GE PGB911 Manual De Instrucciones

Probe (on some models)
The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the temperature
probe before cleaning. Scour stubborn spots with a soap-
filled scouring pad, rinse and dry.
To order additional temperature probes, see the
Accessories and Consumer Support sections at the end
of this manual.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
Do not leave the temperature probe inside the oven
during a self or steam clean cycle.

Cooktop

Removal of Surface Burners for Cleaning
Turn all controls OFF. Allow cooktop to cool before removing grates and burner parts. When removing the burner
caps and heads, remember their size and location. Replace them in the same location after cleaning.
CAUTION
Do not attempt to remove oval or dual oval burner caps from the burner heads.
Round Burner Cap
Round
Burner
Head
Electrode
Round Burner
24
Oval Burner Cap
Oval
Burner
Head
Outer Burner Cap
Electrode
Oval Burner
(on some models)
Inner Burner Cap
Round
Burner
Head
Electrode
Multi-Ring Burner
(on some models)
Round Burner Cap
Dual Oval Burner Caps
Dual Oval Burner
(on some models)
49-85221-2