Bosch PAD 12001 Instrucciones De Uso página 27

Programmed start
and stop
1.
Press three times. The
start and stop times are both
displayed on the screen. The
start time is flashing.
Check that the appliance is connected to the mains
electricity supply, an operation mode has been
selected and the clock displays the real time.
2.
Set the start time using
–
and .
The start time changes in
15-minute blocks.
4.
Set the stop time using
–
and .
The stop time changes in 15-
minute blocks.
Important!
Deleting the timer setting.
To delete the timer setting, press
from the position indicated in the figure.
The time setting disappears from the display.
+ 3.
Press
time flashes on the display
screen.
+ 5.
Do not press any of the
buttons on the appliance for
a period of 5 seconds. The
start and stop time displays
stop flashing and are now
set.
again. The stop
3 times
27