3 Press and hold PROG until "
→
If a radio station is stored in one of the earlier
presets, the same radio station will not store under
another preset number.
→
If no preset number is selected, automatic preset
will begin from preset (1) and all former presets will
be overridden.
Manual presetting
You can choose to store only your favourite radio stations.
1 Tune the desired radio station (see "Tuning radio
stations" on page 44).
2 Press PROG.
3 Press b / a to select a preset number.
4 Press PROG again to store.
Selecting a preset radio station
Press b / a or use the numeric keypad (0-9) to
select a preset number.
→
The waveband, preset number, then radio frequency
appears.
Deleting a preset radio station
Press and hold s on the front panel until "
" or "
DELTD
FM XX DELTD
→
The current preset radio station is deleted.
Setting frequency step
(Asia except Korea model)
The inter-station frequency spacing differs depending on
the areas. Set the frequency step according to the
frequency spacing in your area.
Choices:AM9kHz/FM50kHz, AM10kHZ/FM100kHz
Default setting: AM9kHz/FM50kHz
To change the AM band to 10kHz and the
FM band to 100kHz
1 Unplug the AC power cord from the DVD receiver
and wait at least one minute.
2 While pressing and holding INPUT and b on the
front panel, plug the AC power cord to the DVD
receiver.
3 After "
CINEMA STATION
release the keys.
Note
Repeat the above steps
1
to
and FM band to 50kHz.
" appears.
AUTO PRESET
AM XX
" (
: preset number) appears.
XX
" scrolls in the display panel,
3
to change AM band to 9kHz
TUNER OPERATIONS
6
45