■ Adjusting the volume level
Use the VOLUME control (or press VOL (+/–) on the
remote control) to increase or decrease the volume
level.
→
"
" is the minimum volume level and
VOL MIN
"
" is the maximum volume level.
VOL MAX
To mute the volume temporarily
Press MUTE on the remote control.
– Playback continues without sound and "
appears.
– To restore the volume, press MUTE again or
increase/decrease the volume level.
■ Night listening mode
When night listening mode is activated, high volume
output is softened and low volume output raised to an
audible level (for DVD playback only). This is useful for
watching your favorite action movie without disturbing
others at night.
This function is only available for Dolby Digital.
– Press NIGHT on the remote control to activate the
night listening mode.
→
Playback continues at a more even volume and
"
" appears in the display panel.
NIGHT ON
– To restore the volume, press NIGHT again.
→
Playback continues with the full dynamic range of
surround sound, and "
NIGHT OFF
display panel.
■ Switching to active mode
– Press TUNER repeatedly on the remote control to
select the appropriate active mode.
Each time you press TUNER, the front display
changes as follows:
TUNER/FM
TUNER/FM
– Press AUX repeatedly on the remote control to select
■ Switching to standby mode
"
MUTE
" appears in the
the appropriate active mode.
Each time you press AUX, the front display changes as
follows;
AUX/ANALOG
AUX/DIGITAL
Press STANDBY/ON on the front panel or POWER
(
) on the remote control.
→
The display screen goes blank.
SOUND CONTROLS
6
47