Sony SU-W100 Manual De Instrucciones página 7

Step 5: Connect the cables to the TV
Before securing the TV to the wall, connect the
cables to the TV.
You can arrange the cables by passing them
along the sides of bracket B.
Note
Do not replace the rear cover of the TV for the moment.
Step 6: Secure the TV to the wall
Hook bracket B on bracket A.
1
Bracket B
Notes
• Secure the TV to the wall without the rear cover.
• Hold the TV firmly. Be especially careful when you secure the TV in a high place.
Align the screw holes on
2
bracket B with those on
bracket A, and fully tighten
the supplied two screws
using a coin or similar.
Note
To prevent the TV being dropped, hold
the TV firmly as illustrated and tighten
the screws.
Bracket A
Wall
Bottom view
Bracket B Bracket A
Bracket A
Two screws
(supplied)
continued
Wall
7