Indexing A Disc (Custom Index) - Sony CDP-X5000 Manual De Instrucciones

Indexing a Disc (Custom Index)

You can index a disc at up to 8 points (for a disc with
32 tracks or less) or 5 points (for a disc with over 32
tracks) so that you can easily locate a desired point.
This might be useful when you play discs of
symphonies or concertos that divide one piece into
several tracks (see the example below).
Example
First
piece
Track No. 1 2 3 4
Custom
1 2
Index No.
Number
buttons
CHECK
Æ
= +
/
C c
C c
1
Place a disc.
2
Press C.INDEX on the remote.
"CUSTOM INDEX" appears in the display.
The music calendar disappears.
MIN SEC
C.INDEX
3
Press FILE at the point you want to index.
The Custom Index number flashes in the display.
The player repeats the portion for 3 seconds from
the point to be indexed.
4
Press 0 or ) to adjust the point so that the
player repeats from the exact point you want to
index.
Pressing these buttons 7 times moves the point by
about 1 second ahead or behind.
If you don't want to index at the point
Press CLEAR and search another point to be indexed.
Storing Information About CDs (Custom Files)
Second Third
piece
piece
5 6 7 8 9
3
C.INDEX
FILE
ERASE
P p
/
0 )
0 )
0 )
CUSTOM INDEX
5
Press FILE again to store the Custom Index.
"INDEX" in the Custom File indication lights up in
the display.
6
To mark more Custom Indexes, repeat Steps 3 to 5.
When you've already decided where to index
You can directly mark an index without adjusting the
point. When you find the point to be indexed, first press
P to pause playing and press FILE to mark an index.
"INDEX" appears in the display.
Playing from an indexed point
(Custom Index Play)
1
Press C.INDEX on the remote.
"CUSTOM INDEX" appears in the display.
2
Locate the Custom Index you want as follows:
To locate Press
c during playback
The next Custom Index
C during playback
The current Custom
Index
Number button of the Custom
A specific Custom Index
Index
directly
MUSIC SCAN in stop or play
By scanning the indexed
mode. When you find the point
points for 10 seconds
you want, press · to start
playing.
Playback starts from the selected Custom Index to
the end of the disc.
To cancel the Custom Index Play
Press CONTINUE on the remote.
Notes
• You cannot use the index search function (see page 10).
• Use C/c buttons to locate the next or the current
Custom Indexes, instead of =/+ buttons.
Playing from one index to the next one (Custom Index
Single Play)
1 Press C.INDEX on the remote.
"CUSTOM INDEX (1)" appears in the display.
2 Press the number button of the Custom Index you want.
Playback starts from the selected Custom Index and
stops at the beginning of the next index.
To cancel the Custom Index Single Play, press C.INDEX on
the remote).
You can play the portion between two indexes
repeatedly
Press REPEAT.
GB
19