Quilo QP110 Manual Del Propietário página 19

CLEANING & MAINTENANCE (CONTINUED)
End of Season Storage & Maintenance:
If the appliance will not be used for a long time:
1. Be sure to drain the left-over water condensation. Remove the lower drain plug and use a
shallow pan to collect the water (make sure to replace the drain plug when finished).
2. To dry excess moisture, run the unit in Fan only mode for 30 minutes before storing.
3. Turn off and unplug the Quilo
4. Remove the dust filter and clean with water. Dry the dust filter and then reinstall.
5. Disconnecting the Window Installation Kit:
• Remove the Exhaust Hose from the unit.
• Remove the Window Bracket, Window Bracket Panel Adapter and Hose Connector.
• It is recommended to store the Window Kit parts in a bag together with the Remote Control and placing
them together with the Quilo
•
If needed, you can clean the Window Kit with a damp cloth and water before storing. Make sure all
parts of the Window Kit are dry before storage.
TM
6. Cover the Quilo Portable Air Conditioner with a cloth/ plastic bag before storage, to protect from dust and
scratches collecting on the surface of the unit.
7. It is recommended to coil the power cord before storing to ensure the cord is protected from bents
and creases.
TM
8. Store the Quilo Portable Air Conditioner in a cool, dry place, away from direct sunlight.
TM
Air Conditioner from the power supply.
TM
Portable Air Conditioner unit.
EN
10 EN