3.
While the camera is trapped by one hand, use your other
hand to hold the dimples along the sides to move and aim
the camera. Make sure the camera lens is aligned with the
horizon.
Tip: If you have trouble aiming the camera, try any of the following:
•
•
•
4.
When the camera has been aimed, use the provided
tamper resistant key to tighten the cover to the base.
For More Information
Additional information about setting up and using the device is
available in the following guides:
•
Avigilon Camera Installation Tool User Guide
•
Avigilon Control Center Client User Guide
•
Avigilon High Definition H.264 Web Interface User Guide
The manuals are available on the Avigilon website:
support-and-downloads.
If the camera is stuck to the dome cover, lift the
dome cover slightly and push the camera into the
base to loosen the grip.
If the camera won't turn as far as you want, try
turning it in the opposite direction.
If the video image is upside-down, you can digitally
flip the image in the network video management
software rather than re-aim the camera.
Horizon markers
http://avigilon.com/
9