When Drilling; Transport Wheels; Change Drill Column - Husqvarna DS900 DD Manual De Instrucciones

When drilling

NOTICE! Make sure the cable and/or water hose is not
pinched between the guide wheel and the column.
Transport wheels (accessory)
• Position the transport wheel bracket in the hole in the
base plate.
• Secure the transport wheels with the clips.
OPERATING
1
2
Change drill column (accessory)
• Loosen the top screw and remove the end stop.
• Unlock the feeder housing. Remove the feeder
housing from the column.
• Loosen the locking screw for the locking clamp.
• Remove the drill column.
• Assemble the parts in the reverse order.
–
English 11