TECshow DMX PINSPOT LED BAR Manual De Usuario página 3

2. WARNING
Caution
Like all electronic products, DMX Pinspot
LED Bar must be used with common safety
precautions in mind.
• This appliance must be earthed.
• The unit contains no user-serviceable parts.
Refer servicing to qualified technicians only.
• The electrical installation should be carried out
by qualified personal only, according to the reg-
ulations for electrical and mechanical safety in
your country.
• Disconnect from electric mains power supply
before removing covers or changing spare
parts. Keep case closed while operating.
• Do not insert objects into air vents.
• Keep away from flames and flammable mate-
rial. Keep away from liquids. Never operate in
rain or in damp conditions.
• If effect lights are dropped or struck, discon-
nect mains power supply immediately. Have
a qualified engineer inspect for safety before
operating.
• LED and metal become hot during operation.
Allow time to cool before handling.
• Not suitable for mounting on normally flamma-
ble surfaces. Disconnect from mains supply
before removing cover. Minimum distance to
lighted object is 0.4m.
• Without changeable structure by non-qualified
user, please do not open the cover or have any
change at will, otherwise, it may cause accident!
• The appliance is for adult use. Keep out of
reach of children. Never leave the unit running
unattended.
• Please use the original packing (recommend)
when the device is to be transported.
• Maximum save ambient temperature is 40°C. Don't
use this unit at higher ambient temperatures.
• Due to safety reasons it is prohibited to make
unauthorized modifications to the unit.
• To protect the environment, please try to
recycle the packing material as much as
possible.
• Read user manual instructions thoroughly be-
fore operating. Follow the instructions. Never
remove warning or information labels from
the unit.
There are no user serviceable parts inside this
unit. Do not attempt any repairs yourself, do-
ing so will void your manufactures warranty.
In the unlikely event your unit may require
service please contact your local dealer.
Particular Warning
Never look directly into the light source! Don't
use the effect in the presence of persons suffering
from epilepsy. Please install the product correctly
according to the instruction of the user manual.
To avoid any accident, it is not allowed to install
the product with any way not instructed on the
user manual. If accident happens because users
do not install the product according to the in-
struction of the user manual, the manufacturer
will not take any responsibility.
Please note
Specifications and improvements in the design of
this unit and this manual are subject to change
without any prior written notice.
Important
The wires in this mains lead are colored in accord-
ance with the following code.
EU
Green and Yellow – Earthed (E)
Blue – Neutral (N)
Brown – Live (L)
Warning: This appliance must be earthed.
English version
P. 3
| Tecshow DMX Pinspot LED Bar