Getting Ready; Installation Instructions - TECshow DMX PINSPOT LED BAR Manual De Usuario

4. GETTING READY

All products are thoroughly tested at the factory
and shipped in perfect condition. If damage has oc-
curred during shipping, or if components are miss-
ing, please contact your local dealer immediately.

Installation Instructions

DXM Pinspot LED Bar is shipped complete, ready to
use. The bracket is installed before shipping, the
unit can be hung in any position. Fasten the DXM
Pinspot LED Bar onto firm trussing (Use a 10-kg
rated or stronger C-clamp bolted onto the bar,
enhancing safety necessarily with safety cables).
Allow enough space (around 20cm) on all sides for
proper cooling.
Method 1
C-clamp
Method 2
Safety cables
P. 6
Tecshow DMX Pinspot LED Bar | English version
Safety cables
C-clamp
C-clamp
Safety cables