Assistance; Spare Parts - Indesit IDCE 845 A Manual De Instrucciones

Assistance

Heat Pump System
This dryer is fitted with a sealed heat pump system to dry
EN
your clothes. To operate, the heat pump contains fluorinated
greenhouse gases ( F gases) which are covered by the Kyoto
Protocol. These F gases are contained in a hermetically
sealed unit. This sealed unit contains 0.34 kg of the F gas
R134a which acts as a refrigerant.
If the sealed unit fails then it must be replaced by a new
sealed unit. Contact your nearest service centre for advise.
Note: The gases contained in the sealed unit are not
hazardous to health, but if they escape they will have an
impact on global warming.
Before calling the Technical Assistance Centre:
• Follow the troubleshooting guide to check whether pro-
blems can be solved personally (see Troubleshooting).
• If not, switch the dryer off and contact the Technical Assi-
stance Centre closest to you.
Provide the following data when contacting the
Technical Assistance Centre:
• name, address and postal code
• telephone number
• type of malfunction
• date of purchase
• the appliance model (Mod.)
• the dryer's serial number (S/N)
This information can be found on the data plate located
behind the door.
Comparative programmes
• recommended programmes for the EN61121 comparative test.
Programme (EN61121)
Cotton drying cycle
Cotton drying ironing
Easy care fabric
!
Note: this is not a complete list of the programme options.
48
Programme to be selected
Cotton Cupboard dry
Cotton Iron dry
Synthetic Cupboard dry
This appliance conforms to the following EEC directives:
- 2006/95/EC (Low Voltage Directive)
- 89/336/EEC, 92/31/EEC, 93/68/EEC (Electromagnetic Compatibility Directive).

Spare parts

This dryer is a complex machine. Attempting to repair it
personally or with the aid unqualified personnel may put the
safety of people at risk, damage the machine or invalidate
the spare parts guarantee.
Always contact a qualified technician when experiencing
problems with this machine.
Please note that it is an offence for an unqualified person
to undertaken any servicing or repair work that involves
breaking into the sealed heat pump unit.
The spare parts were designed exclusively for this machine
and should not be used for any other purpose.
Load size
7.5 kg
7.5 kg
3 kg