Cleaning The Appliance - Bosch 2 Serie Instrucciones De Uso

6 Press the steam release button (17) for 2 seconds.
The descaling process will start automatically. During
this process, short beeps will be heard.
7 After approximately 3 minutes, the iron will stop
releasing steam. A long beep will be heard, indicating
that descaling process has finished. The appliance
will switch off automatically.
8 To clean the soleplate (18), immediately rub off any
residue by running the hot iron over a wet cotton
cloth.
Wipe the housing of the iron with a cloth.
9 The container gets hot during the descaling process.
Let it cool down and then empty the container.
Note: You can perform the decalcification process even if
the"Calc'nClean" indicator light (7) is not blinking. Go
directly to point 1.

2. Cleaning the appliance

Regularly clean your appliance for properly maintenance.
Attention! Burn risk!
1 If the appliance is only slightly soiled, wipe it with a
damp cotton cloth only, and then dry it.
2 To keep the soleplate smooth, you should avoid
contact with hard metal objects. Never use a scouring
pad, or chemicals to clean the soleplate.
* Model dependent
23
BOS CH