REMOVAL OF THE LOWER AND UPPER BURNER AND INSTALLATION OF THE
INJECTOR TO THE GAS OVEN
Removal of the Upper Burner:
With the help of a screw driver, remove the screw as shown in Figure
15. As shown in Figure 16, remove the burner from its place by pulling
it to yourself. As shown in Figure 17, remove the injector in the bearing
with a socket wrench. In order to re-place the burner, apply the removal
process reversely.
Figure 15
Removal of the Lower Burner:
The lower burner door has been ixed with two screws. As shown in
Figure 18, remove it with the help of a screw driver. Remove the door by
pulling upwards as shown in Figure 19. Remove the burner from its place
by pulling it to yourself as shown in Figure 20. As shown in Figure 21,
remove the injector in the bearing with a socket wrench. In order to re-
place the burner, apply the removal process reversely.
Figure 18
Figure 20
GB
Figure 16
Figure 19
Figure 21
45
Figure 17