2.2 Cooler/Humidifying
Fill the water tank before selecting this function.
1.
Extract the water tank (fig. 4) and fill with MAX 4.5L (152
oz) of fresh tap water (do not overload the water tank: see
water level indicator A2).
2.
Put the tank back in the appliance;
3.
Press the
button (B3 or D6): the corresponding light
on the display turns on (fig. 5) and the air, flowing through
the cooling pad, comes out fresh and contributes to decrea-
se the room temperature;
Please note:
At first use, the appliance could emit a strange odor and the
water could be discolored: this is part of normal use.
Using the ice box/pack you can increase the efficiency of the
appliance.
4.
Fill the ice box/pack with tap water (fig. 6);
5.
Put the ice box/pack in the freezer and leave it in until it is
frozen (fig. 7);
4
6.
tank as shown in figure 8;
5
7. Replace the water tank, turn on the appliance and select
Cooling/Humidifying: the air flow will be fresher than be-
fore (fig. 9).
Please note:
Always check the Ice box/pack is correctly inserted in its housing
(see fig. 8).
6
Put the ice box/pack vertically in the front left corner of the
6
7
8