AMQ KINEX Guia De Instalacion página 15

PHASE 6 | Electrical — 4 Circuit
6-duplex power block
available which requires
2 brackets
Lock in position
Step 1
Install the 4-circuit brackets into the beam . There
are pre-threaded holes ready . Use the machine
screws provided in the package for operation .
4-circuit with 4-duplex power block requires 1
bracket (6-duplex power block available which
requires 2 brackets) .
Step 2
Drop-in the power block into the bracket and make
sure it locks into position .
KINEX INSTALLATION GUIDE | 15
x 2
1
2
3
2
4-duplex power block
1
Step 3
Install the supporting bracket at each end of the
power block using the long screws provided .
Step 4
Hook the bottom beam covers on the hooks
provided .
KINEX SINGLE RUN
3
4
amqsolutions.com