Accessories - AMQ KINEX Guia De Instalacion

PHASE 1 | Hardware, Components & Optional Accessories
Hardware
M6*10
x 6
Components
Column (left & right)
(3-Stage, 2-Stage or
Fixed Column)
Cantilever set
(left & right)
Beam Bottom
Cover x 2
Optional
LED Handset with 4 presets
ST4*20 x 2
These drawings identify the parts included with your Height Adjustable Table . Some of these parts are considered by regulatory bodies
to be critical components . If any parts shown here do not match your order, please contact AMQ at cc@amqsolutions.com
KINEX INSTALLATION GUIDE | 8
M10*22 ST3*20
x 10 x 2
SR Beam (48", 60"or 72")
Feet set
(either 22" or 28")
Bridge Beam Side
Connector Cover x 2
Screen Clip x 2
M6*10 x 4
ST5*20 M6*12
x 18 x 8
Stretcher Frame
Standard
Handset x 1
Not including the above electricals for fixed height
NOTE:
Kinex (using fixed columns)
Beam Front
Cover x 2
SR Cross Beam & Cover Set
(for 24" or 30")
M6*10 x 6
M10*22
KINEX SINGLE RUN
M6*10 x 4 Allen Keys
(16 screws
already
pre-mounted)
Worksurface
(48", 60"or 72" in width
23" or 29" in depth)
Power Cord Connector
x 1 Cables
(6 pins) x 1
Electrical Outlet Beam Screen
Cover x 6 Clip Hole
Cover x 2
SR Power Pole Adapter
M6*10 x 4
amqsolutions.com