Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Care and Maintenance
Poor or
distorted
sound
Intermittent
sound
• Remove all protective
films from the system.
• Secure all cable connections
on the soundbar, TV, and connected
sources.
• If you see the error message Cannot
find Acoustimass:
- Plug in the Acoustimasd _ module.
- Pair the Acoustimass
module with the console (see "If your console
cannot find the Acoustimass ° module").
using the analog or _
connector, decrease the volume on your source.
o
If
Factory reset the system (see page 30) and run the ADAPTiQ°audio
calibration (see page 18).
Secure all cable connections
on the soundbar, TV, and connected
sources.
Move system away from potential interference, such as a wireless router,
cordless phone, television,
microwave,
etc.
Mfyour
console
cannot
find
the
Acoustirnass
® module
The Acoustimass
module
and console
are paired
at the factory.
However,
if you
see the error message
Cannot
find
Acoustimass
on the display,
perform
this
pairing
procedure:
1.
Unplug
the Acoustimass
module.
2.
Press
on the remote
control.
3.
Press Y until 15 PAIR AOOUSTIMASS
appears
on the display.
4.
Press @.
Plug
in Acoustimass
appears
on the display.
5.
Plug the AC power
cord
into an AC (mains)
outlet.
After the Acoustimass
module
connects
to the console,
Pairing
complete
appears
on the display.
English - 29
Publicidad
Capítulos
Tabla de contenido
