Adjusting The Picture; Changing The Aspect Ratio (Digital Tv Mode Only) - Dynex DX-R24TV Guia Del Usuario

Televisor de tubo de imagen curvo de 2
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using your TV
2 Press
3 Press
submenu opens or the setting is changed.
4 Press MENU to return to the previous menu, or press EXIT to exit the menu system and
return to your program.
Note: The illustrations and on-screen displays in this manual are for explanation purposes

Adjusting the picture

To adjust the picture:
1 Press MENU to open the MAIN MENU. The PICTURE menu is highlighted.
2 Press
3 Press
4 Press
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
5 After modifying your desired setting, press EXIT to return to normal screen.
To select a preset picture setting:
• Press PICTURE on the remote to cycle through the available picture settings, which
include:
• STANDARD —Select for a normal picture
• DYNAMIC —Select for a bright and dynamic picture
• SOFT —Select for a finely detailed picture
• PERSONAL —The picture quality you set

Changing the aspect ratio (digital TV mode only)

You can change the aspect ratio (picture size) of the picture, based on the video signal type or
your preference.
To change the aspect ratio:
• When the video signal is in the 16:9 (wide screen) format, press ZOOM to select the
aspect ratio you want (between NORMAL and ZOOM).
or
to select a specific menu, then press or . The specific menu opens.
or
to select a submenu or change a setting, then press or . The
and may vary slightly from the actual ones.
or
to open the PICTURE menu.
or
to select the item you want to adjust.
or
to adjust the setting.
Item
decrease
decrease
paler color
purplish tint
softer picture
increase
increase
brilliant color
greenish tint
clearer picture
23

Publicidad

Tabla de contenido
loading

Tabla de contenido