Technical Data - Bona DCS70 Instrucciones De Uso E Instrucciones De Seguridad

Bona DCS70

TECHNICAL DATA

Motor type:
Voltage (+/- 10%):
Frequency:
Fuses:
Max Flow:
Max Vacuum:
Hose:
Coarse filter:
HEPA filter:
Noise level:
Bag system:
Length/Wide/Height:
Weight:
Dust capacity:
Hour meter:
We congratulate you on your choice of a new Bona DCS70.
Read the complete user instructions carefully before starting to use the
machine. If anything is not clear, you can obtain help from your dealer or from
Bona. You can also visit our web site,
manuals, schematics and spare parts.
Important!
This Operator's Manual only concerns Bona DCS70
Bona DCS70 may only be used for handling dry non explosive, materials.
Bona DCS70 is designed to handle wood dust when sanding floors and vacuuming with Bona's
equipment. Bona AB disclaims all responsibility if the Bona DCS70 is used for other purposes
or is handled differently than described in this Operator's Manual.
Pay special attention to the Safety Instructions.
Read the Operator's Manual before starting to use Bona DCS70.
Spare parts used on the Bona DCS70 must be approved by Bona AB.
1-phase, 1400 W
230 VAC
50/60 Hz
10
260m3/h
28kpa
7,5m x  38mm
Folded 1,2m
H13 1,5m
80 dB(A)
Longopac® 20 m
78x60x115cm
43kg
70l
99 999 hrs
www.bona.com , where you can find
2
slow-blow
2
2