Cleaning And Maintenance; Technical Specifications - Toolland PHG2 Manual Del Usuario

Switching on

Set the switch to I or II, depending on the application.
Switching off

Set the switch to 0.
7.

Cleaning and Maintenance


Make sure the heat gun is unplugged from the mains.

Wipe the device with a moist, lint-free cloth. Do not use alcohol or solvents. Do not submerge in any
liquid.

Make sure the ventilation openings are clean at all times.

Do not store the heat gun in a humid environment.

Contact your dealer for spare parts if necessary.
8.

Technical Specifications

input voltage
max. power
power cord length
air flow
temperature
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.toolland.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 03 – 17/05/2018
PHG2
230 VAC 50 Hz
2000 W
1.8 m
setting I: 250 L/min
setting II: 550 L/min
setting I: 350 °C
setting II: 550 °C
260 x 90 x 210 mm
630 g
7 ©Velleman nv