Care And Maintenance - Toolland VL101 Manual Del Usuario

4. Overview
Refer to the illustrations on page 2 of this manual.
A
B
C
D
5. Operation
1. Plug the device to the mains outlet.
2. Switch the device on with the on-off button.
Notes
 Dry woods, leaves, pine needles and dry grasses may catch fire. Watch the treated plants
for some time after treatment.
 The best time to treat sprawl is in the spring. The results are not visible immediately.
 Older plants with hard leaves, such as thistles, dry earliest after repeated treatment at
intervals of one to two weeks. Some types of grasses are extremely robust and require a
longer exposure to heat.
 The weed needs only be heated. Burning is not necessary. The cells of the leaves dry out in
this way and the weed dies.
 Certain weed species require repeated treatment.
6.

Care and Maintenance

 The mains plug must be disconnected:
When faults occurring during operation
o
Before performing any cleaning
o
After every use
o
 Let the device cool down before storage.
 If necessary, wipe the device with a dry, lint-free cloth or a brush.
 Do not immerse the device in any liquid.
 If the device falls into water, unplug it immediately. Never reach into the water when the
unit is still connected.
V. 04 – 01/04/2019
handle
power cord
on-off button
air intake
VL101
E
F
G
H
5
housing
heater
heat shield
nozzle
©Velleman nv