Technical Specifications - Toolland FT101 Manual Del Usuario

6.3 Checking The Cartridge Charge
 Make sure the torch valve is closed, rotate the adjusting knob clockwise.
 Shake to check if the noise of the liquid gas can still be heard.
6.4 Injector Cleaning
 Unscrew the injector from its proper seat with a spanner of 7 mm.
 Clean the injector and screw it completely.
 Check the seal.
6.5 Caution
 Do not use needles or pins to clean the injector, damage could result making the torch dangerous.
 If the blockage cannot be removed, replace the injector.
6.6 Storage
 Disconnect the device from the canister.
 Store the device and the canister in a cool, dry and well ventilated place.
 Shelter the canister from the sunlight.
 Do not expose to a temperature higher than 50°C
 Keep out of the reach of children.
7.

Technical Specifications

length ................................................................................................................... 60 cm
burner diameter ....................................................................................................... 6 cm
gas hose................................................................................................................. 1.5 m
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 03 – 25/07/2017
FT101
5 ©Velleman nv