Toolland VL6000 Manual Del Usuario página 5

Pass the safety instructions on to all persons who work with the machine.
Keep these safety instructions in a safe place.
 Make yourself familiar with the equipment before using it by reading and understanding the operating
instructions.
 Do not use the machine for unsuitable purposes.
 Mount the machine on a non-skid and level ground.
 Avoid abnormal posture. Ensure that you have stand in a secure standing position and maintain your
balance at all times.
 Be attentive and be careful what you do. Behave sensibly when working. Do not use the device when you
are tired or under influence of drugs or alcohol. One moment of carelessness when using the device can
result in injuries.
 Wear suitable work clothes.
Do not wear loose-fitting clothes or jewellery, which can be caught in moving parts.
o
Wear gloves and slip-proof shoes.
o
Wear a hairnet if you have long hair.
o
 Wear protective clothing such as
safety goggles,
o
ear protection,
o
a dust mask.
o
 Keep your workplace in an orderly condition. Untidiness can result in accidents.
 Take environmental influences into consideration:
Do not use the device in a moist or wet environment.
o
Do not expose the chain sharpener to rain.
o
Do only work with sufficient visibility conditions. Provide for good illumination.
o
 Never leave an operational device unattended.
 Persons under the age of 18 must not operate the device.
 Do not allow other persons, especially children, to touch the device or cable. Keep them away from your
working area.
 Do not overload the device. You work better and safer in the given performance range.
 Only operate the device with complete and correctly attached safety equipment and do not alter anything
on the device that could impair the safety.
 Do not use any grinding wheels, which do not comply with the indicated characteristics of this instruction
manual.
 The use of other tools and other accessories may present a risk of injury to you.
 Worn and defective grinding wheels (cracks, imbalance, chipping, etc.) must be replaced immediately.
 Ensure a firm seat of the grinding wheel.
 Switch the device off and remove the mains plug from the socket when
carrying out repair works,
o
maintaining and cleaning the device,
o
eliminating failures such as freeing a blocked grinding wheel,
o
storing the device,
o
leaving the chain sharpener, even for short-term interruptions.
o
 Caution: the grinding wheel runs after! Do not brake the grinding wheel by hand or using lateral pressure.
 Maintain your chain sharpener with care:
Keep the device free of oil and grease.
o
Follow the maintenance instructions and the instructions for tool exchange.
o
 Check the machine for possible damage:
Before continuing to use the machine, the protective devices must be inspected to ensure that they
o
work perfectly and within their intended function.
Check whether the movable parts function perfectly and do not stick or whether the parts are damaged.
o
All parts must be properly mounted and all conditions met to ensure the flawless operation of the chain
sharpener.
V. 01 – 05/06/2015
VL6000
5 ©Velleman nv