Machine's Safety Equipment; General Safety Precautions - Husqvarna PP 325 E Manual De Instrucciones

Ocultar thumbs Ver también para PP 325 E:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Machine's safety equipment

This section describes the machine's safety equipment,
its purpose, and how checks and maintenance should be
carried out to ensure that it operates correctly. See the
"What is what?" section to locate where this equipment is
positioned on your machine.
WARNING! Never use a machine that has
!
faulty safety equipment!
All servicing and repair work on the
machine requires special training. This is
especially true of the machine's safety
equipment. If your machine fails any of
the checks described below you must
contact your service agent. When you
buy any of our products we guarantee
the availability of professional repairs
and service. If the retailer who sells your
machine is not a servicing dealer, ask
him for the address of your nearest
service agent.
Emergency stop
The emergency stop at the machine breaks the mains
power supply.
Testing the emergency stop
Make sure that the hydraulic hoses are connected to
each other.
Start the machine.
Press the emergency stop and check that the engine
stops.

General safety precautions

Do not use the machine without first reading and
understanding the contents of this Operator's Manual.
WARNING! There is always a risk of
!
shocks from electrically powered
machines. Avoid unfavourable weather
conditions and body contact with
lightning conductors and metal objects.
Always follow the instructions in the
Operator's manual to avoid damage.
Never use the machine if you are tired, if you have
drunk alcohol, or if you are taking medication that
could affect your vision, your judgement or your co-
ordination.
Wear personal protective equipment. See instructions
under the heading "Personal protective equipment".
Never pull out the plug by pulling the cord.
SAFETY INSTRUCTIONS
Regularly check that the battery charger connection
wire is intact and that there are no cracks in it. Keep
all cables and extension leads away from water, oil
and sharp edges. Make sure the cable is not jammed
in doors, fences or the like. Otherwise it can cause the
charger to become live.
Check that the cord and extension cord are intact and
in good condition.
Never use the machine if the cord is damaged, hand
it in to an authorized service workshop for repair.
To avoid overheating do not use the extension cord
while it is rolled up.
The machine should be connected to an earthed
outlet socket.
Check that the mains voltage corresponds with that
stated on the rating plate on the machine.
Always switch off the power to the hydraulic unit and
pull out the electric cable before moving the
equipment.
Keep all parts in good working order and ensure that
all fixtures are properly tightened.
Never use a machine that is faulty. Carry out the safety
checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the
heading Maintenance.
Do not modify safety equipment. Check regularly that
they function as they should. The machine must not
be run with defective or disassembled safety
equipment.
Never allow anyone else to use the machine without
first ensuring that they have read and understood the
contents of the operator's manual.
People and animals can distract you causing you to
lose control of the machine. For this reason, always
remain concentrated and focused on the task.
Make sure no unauthorised persons are in the
working area, otherwise there is a risk of serious
personal injury.
Be careful as clothing, long hair, and jewellery can get
caught in moving parts.
Observe care when lifting. You are handling heavy
parts, which imply the risk of pinch injuries or other
injuries.
Transport and storage
Always switch off the power to the hydraulic unit and
pull out the electric cable before moving the
equipment.
If there is a risk of freezing, the machine must be
drained of any remaining water coolant.
The power pack is constructed as a wheeled cart with
the possibility of hanging hydraulic hoses for simple
transportation at the workplace.
For transportation between workplaces, the power
pack should be stored in vertical position with the
distribution box facing upwards.
Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
English
7

Publicidad

Tabla de contenido
loading

Tabla de contenido