Adding And Subtracting Distances - Perel EEM700 Manual Del Usuario

3. Press the MEAS button a second time and measure the length of the
bottom line [2].

7.7 Adding and Subtracting Distances

1. Measure your first distance.
2. Press the + or – button to enter the adding or subtracting mode.
3. Measure your second distance.
4. The meter automatically calculates the length. The value appears on
the LCD display.
7.8 Storing and Browsing Measurements
Storing
Measured values will automatically be stored in the meter's memory. The
memory can store up to 10 measurement values.
Browsing
1. Press the storage button to enter the meter's memory.
2. Browse through the stored values with the + or – button.
3. Hold the storage button pressed to delete all previously stored values.
8. Troubleshooting
symbol
signal too weak or too
strong
light surrounding
measuring point too
strong
V. 01 – 07/05/2015
EEM700
cause
8
possible solution
re-measure the distance
choose a measuring point
with weaker surrounding light
©Velleman nv