Starrett S7010 Manual De Instruccion página 103

FIG 06
ADJUSTMENT OF ANGULAR CUTTING:
1. LOOSEN the sex screw (allen type) located on the underside of the tool
using Hex Wrench (fi gure 07A);
2. MOVE the Shoe Plate backwards so that the teeth on the plate no lon-
ger engage with the retaining teeth. TURN the Shoe Plate to be tilted to the
left or right;
3. SELECT 15°, 30° or 45° to the left or right or select 0° (fi gure 7B);
4. PUSH the Shoe Plate forward so that the teeth on the plate mesh with
the retaining teeth;
4. TIGHTEN the hex screw (fi gure 07A);
5. The angle selected can be read on the cutting angle guide on the Shoe
Plate (fi gure 07B);
ADJUSTMENT LEVER OF
ORBITAL ACTION SYSTEM
ENGLISH
S7010 103